Setting Up The Compaq Storageworks Raid Array 4000 Storage System - Compaq ProLiant 1600 Administrator's Manual

3-8 Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide
Setting Up the Compaq StorageWorks
Raid Array 4000 Storage System
Follow the instructions in the Compaq StorageWorks RAID Array 4000 User
Guide to set up the RA4000s, the Compaq StorageWorks Fibre Channel
Storage Hub 7 or 12, the Compaq StorageWorks RA4000 Controller
(array controller), and the Fibre Channel cables.
Note that the Compaq StorageWorks RAID Array 4000 User Guide explains
how to install these devices for a single server. Because clustering requires
shared storage, you will need to install these devices for two servers. This will
require running an extra Fibre Channel cable from the storage hub to the
second server.
Dedicated Interconnect
Node 1
Figure 3-1. RA4000 storage system connected to clustered servers in the
HA/F100 configuration
IMPORTANT: It is strongly recommended for cluster configuration that all shared drives
be in the storage box before running the Compaq Array Configuration Utility.
RA4000
storage hub
Node 2
LAN