6-18 Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide
Table 6-6
Compaq Redundancy Manager Informational Messages
The loop has been locked by
another application.
Another program has a lock on
the array controller(s). This
program is either still running or
has exited improperly.
It is recommended that
Redundancy Manager not be run
while another program has a
lock on the array controller(s).
To stop this instance from
starting, select the Cancel
button. To start this instance
select the Start button.
This RA4000 is in
Active/Standby mode. All logical
disks in this array must have the
same path assignments. Are you
sure you want to continue?
Message
Another application has issued a
lock management command to
an array controller. The lock
management command only
allows viewing of the data.
Another program has issued a
lock management command to
an array controller. The lock
management command only
allows viewing of the data.
A request has been made to
change the status of a path in
an Active/Standby configuration.
continued
Description
Action
No action needed to view the
data.
No action needed to view the
data.
Proceed or click Cancel.
continued