Compaq ProLiant 1600 Administrator's Manual page 20

1-8 Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide
Compaq StorageWorks RAID Array 4000
Gigabit Interface Converter-Shortwave (GBIC-SW) modules
Cables
q
Multi-mode Fibre Channel cable
q
Ethernet crossover cable
q
Network (LAN) cable
Each of these components is discussed in the following sections. For detailed
information, refer to the following guides:
Compaq StorageWorks RAID Array 4000 User Guide
Compaq StorageWorks RAID Array 4000 Configuration Poster
Compaq StorageWorks RAID Array 4000 Redundant Array Controller
Configuration Poster
Compaq StorageWorks Fibre Channel Host Adapter Installation Guide
Compaq StorageWorks Fibre Channel Storage Hub 7 Installation Guide
Compaq StorageWorks Fibre Channel Storage Hub 12 Installation
Guide
Compaq Fibre Channel Troubleshooting Guide
For more information about shared storage clustering, refer to the
Microsoft Cluster Server Administrator's Guide.
The Compaq StorageWorks RAID Array 4000 (RA4000, previously Compaq
Fibre Channel Storage System) is the storage cabinet that contains the disk
drives, power supply, and array controller. The RA4000 can hold twelve
1-inch or eight 1.6-inch Wide-Ultra SCSI drives. The RA4000 supports the
same hot-pluggable drives as Compaq Servers and Compaq ProLiant Storage
Systems, online capacity expansion, online spares, and RAID fault tolerance
of SMART-2 Array Controller technology. The RA4000 also supports
hot-pluggable, redundant power supplies and fans, hot-pluggable hard drives,
and MSCS.
The HA/F100 and HA/F200 ProLiant Clusters must have at least one RA4000
set up as external shared storage. Consult the Order and Configuration Guide
for Compaq ProLiant Cluster HA/F100 and HA/F200 at the Compaq
High Availability website
maximum supported cluster configuration.
(http://www.compaq.com/highavailability)
to determine the