Compaq ProLiant 1600 Administrator's Manual page 94

Setting Up the Compaq ProLiant Clusters HA/F100 and HA/F200 3-21
19. Open the Enterprise Edition Installer and install MSCS on both cluster
nodes as outlined in MSCS documentation.
20. Run the CCVU to verify a successful cluster installation.
21. After cluster installation completes, install Windows NT Service Pack 5.
See the latest release notes for the latest service pack information.
22. Run Compaq Support Software Diskette (SSD) through the diskettes
you created or from the SmartStart CD and verify that all installed
drivers are current.
23. Install your applications and managing and monitoring software.
Refer to the Compaq Insight Manager Installation Poster for information
on installing Compaq Insight Manager on the management console and
Insight Management Agents on servers and desktops. Compaq
Intelligent Cluster Administrator CD is located in your HA/F200 cluster
kit and is available as an orderable option for the HA/F100. Installation
steps for installing Compaq Intelligent Cluster Administrator can be
found later in this chapter and in the Compaq Intelligent Cluster
Administrator Quick Setup Guide.