Settings Screen - Kodak i5000 Series User Manual

Performing a Touchscreen
calibration

Settings screen

3-22
Touchscreen calibration is used to verify that the touch points on the
touchscreen are working correctly. The touchscreen is factory-calibrated and
should not be performed unless directed to do so by Technical Support.
The Settings screen is accessed by touching Settings on the Idle screen.
When you touch the Settings button on the Idle screen, a function list will be
displayed.
NOTE: The value displayed under the option is the current setting.
The Settings screen provides scanner settings that will only need to be set
infrequently.
• Volume — allows you to adjust the volume of the scanner alarm.
• Sounds — allows you to select a sound that you want the scanner to make
when a scanner condition is encountered.
• Language — allows you to select the language you want the information on
the touchscreen to be displayed in.
• Units — allows you to select the units of measurement used in the Print
Offset option.
• User Counter — when enabled, counts all documents that are fed until you
reset it.
• Auto Raise — when enabled, will automatically raise the input elevator
when paper is added to an empty input elevator.
• Dual Stacking Toggle Patch — when enabled, allows you to use patch
sheets to out-sort any selected group of pages from the stack.
A-61670 August 2014