Table of Contents
Advertisement
Starting the SVT
Diagnostics/Scan
Validation Tool
2
1. Select Start>Programs>Kodak>Document Imaging>SVT
Diagnostics.
2. Select ISIS for the Driver Type and the KODAK i5250 (i5650,
i5850) as the driver and click OK.
3. Click one of the Image Display mode buttons to enable the image
preview panels.
4. Click the Setup icon on the main Scan Validation Tool screen.
NOTE: For a description of the icons on this screen, see the next
section, "Scan Validation Tool dialog box".
The Setup dialog box will be displayed.
A-61849/ISIS January 2016
Advertisement
Table of Contents
