Snmp Tab-Notification Recipient - Linksys MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver User Manual

Using the web-based Utility for Configuration
SNMP Tab
Read/Write—Authorized management stations are able to both retrieve and modify MIB
objects.
After configuring each community string, click Add.
SNMP Tab—Notification Recipient
The Notification Recipient screen is used to configure the trap managers that will receive SNMP
notifications or trap messages, and the community strings by which these devices are
authorized management access.
Traps indicating status changes are issued by the Switch to specified trap managers. You must
specify trap managers so that key events are reported by the Switch to your management
station (using network management platforms such as HP OpenView).
You can specify up to five management stations that will receive authentication failure
messages and other notification messages from the Switch.
Recipient IP—IP address of a new management station to receive trap messages.
Notification Type—Specifies whether to send notifications as SNMP v1 traps, or v2c/v3
informs. (Default: Version 1 traps)
SNMP v1,2
Community String—Allows you to name a new community string that will act like a password
and permit access to the SNMP protocol. (The maximum string length is 32 characters, case
sensitive).
SRW2024P User Guide 107