Identification; Ip Configuration; Setup Tab - Time - Linksys MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver User Manual

Using the web-based Utility for Configuration

Setup Tab - Time

Identification

System Name—This field allows you to assign a system name.
System Location—This field is used to enter a description of where the switch is located, such
as 3rd floor.
System Contact—Enter the administrative contact person in this field.
System Object ID—The system object identifier is displayed here.
Base MAC Address—This is the MAC address of the switch.

IP Configuration

Management VLAN—This drop-down list allows you to select the Management VLAN.
IP Address Mode—This drop-down list allows you to select Static or Dynamic IP address
configuration.
Host Name—Enter the DHCP Host Name here.
IP Address—If using a static IP address, enter the IP address here.
Subnet Mask—Enter the subnet mask of the currently configured IP address.
Default Gateway—Enter the IP address of the Default Gateway.
DNS Server—Enter the primary DNS Server information.
You can click Restart DHCP to assign a new IP address using DHCP.
Click the Save Settings button to save your changes or click Cancel Changes to discard the
information.
Setup Tab - Time
The Time screen allows you to configure the time settings for the switch. Simple Network Time
Protocol (SNTP) allows the switch to set its internal clock based on periodic updates from a time
server (SNTP or NTP). Maintaining an accurate time on the switch enables the system log to
record meaningful dates and times for event entries. If the clock is not set, the switch records
the time from the factory default set at the last bootup. When the SNTP client is enabled, the
switch periodically sends a request for a time update to a configured time server. You can
SRW2024P User Guide 32