Admin Tab - Ping - Linksys MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver User Manual
24-port 10/100/1000 gigabit switch with webview and poe user guide
Hide thumbs
Also See for MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver:
- User manual (13 pages) ,
- User manual (169 pages) ,
- User manual (72 pages)
Table of Contents
Advertisement
Admin Tab - Ping
You can use a ping to see if another site on the network can be reached. Ping sends ICMP echo
request packets to another node on the network. Enter the IP address or host name of the
device you want to ping, then click Go. The ping results are displayed in the Ping Status text
box.
The following are some common displayed results of a ping:
•
Normal response—The normal response occurs in one to ten seconds, depending on
network traffic.
•
Destination does not respond—If the host does not respond, a "timeout" appears in
10 seconds.
•
Destination unreachable—The gateway for this destination indicates that the
destination is unreachable.
•
Network or host unreachable—The gateway found no corresponding entry in the
route table
SRW2024P User Guide
Using the web-based Utility for Configuration
Admin Tab - Ping
117
Advertisement
Table of Contents
