Using the web-based Utility for Configuration
VLAN Management Tab - Ports to VLAN
Ingress Filtering—Enables or disables Ingress filtering on the port. Ingress filtering discards
packets which do not include an ingress port.
LAG—Indicates the LAG to which the VLAN is defined.
VLAN Management Tab - Ports to VLAN
Use the Port to VLAN screen to configure port members for the selected VLAN index. Assign
ports as tagged if they are connected to 802.1Q VLAN compliant devices, or untagged they are
not connected to any VLAN-aware devices.
Select VLAN—Select the VLAN number. from the drop-down list.
Switch Port Mode
Indicates VLAN membership mode for an interface. (Default: Access) Possible values are:
Access—Indicates the port belongs to a single untagged VLAN. When a port is in Access mode,
the packet types which are accepted on the port cannot be designated. Ingress filtering cannot
be enabled/disabled on an access port.
Trunk—Indicates the port belongs to VLANs in which all ports are tagged, except for one port
that can be untagged.
General—Indicates the port belongs to VLANs, and each VLAN is user-defined as tagged or
untagged (full 802.1Q mode).
SRW2024P User Guide
44