Linksys MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver User Manual page 119

Level* Severity Name
5 Notice
4 Warning
3 Error
2 Critical
1 Alert
0 Emergency
* The current firmware release supports only Level 2, 5 and 6 event messages.
System Logging
The system allows you to enable or disable event logging, and specify which event levels are
logged to RAM or flash memory. Severe error messages that are logged to flash memory are
permanently stored in the switch to assist in troubleshooting network problems.
System Log Status—Enables/disables the logging of debug or error messages to the logging
process. (Default: Enabled)
Flash Level (0-7)—Limits log messages saved to the switch's permanent flash memory for all
levels up to the specified level. For example, if level 3 is specified, all messages from level 0 to
level 3 will be logged to flash. Note that the Flash Level must be equal to or less than the RAM
Level. (Range: 0-7, Default: 3) R
Ram Level (0-7)—Limits log messages saved to the switch's temporary RAM memory for all
levels up to the specified level. For example, if level 7 is specified, all messages from level 0 to
level 7 will be logged to RAM. (Range: 0-7, Default: 7)
View Flash Logging—Click the button to display log messages stored in the switch's flash
memory.
SRW2024P User Guide
Using the web-based Utility for Configuration
Description
Normal but significant condition,
such as a cold start
Warning conditions, such as return
false or unexpected return
Error conditions, such as invalid
input or default used
Critical conditions, such as memory
allocation, free memory error, or
resource exhausted
Immediate action needed
System unusable
Admin Tab - Log
113