Spanning Tree Tab - STP Port Settings
The Port Information and LAG Information screens display the current status of ports and LAGs
in the Spanning Tree.
State—Shows if Spanning Tree has been enabled on this interface.
Status—Displays current state of this port within the Spanning Tree:
•
Discarding—Port receives STA configuration messages, but does not forward packets.
•
Learning—Port has transmitted configuration messages for an interval set by the
Forward Delay parameter without receiving contradictory information. Port address
table is cleared, and the port begins learning addresses.
•
Forwarding—Port forwards packets, and continues learning addresses.
Forward Transitions—The number of times this port has transitioned from the Learning state
to the Forwarding state.
Operational Edge Port—This parameter is initialized to the setting for Administrative Edge
Port in STP Port Setting detail, but will be set to false if a BPDU is received indicating that
another bridge is attached to this port.
Operational Link Type—The operational point-to-point status of the LAN segment attached
to this interface. This parameter is determined by manual configuration or by auto-detection,
as described for Administrative Link Type in the STP Port Setting detail.
SRW2024P User Guide
Using the web-based Utility for Configuration
Spanning Tree Tab - STP Port Settings
88