Linksys MGBLH1 - Gigabit LH Mini-GBIC SFP Transceiver User Manual page 114

Using the web-based Utility for Configuration
SNMP Tab
Notification Version—Specifies whether to send notifications using SNMP v1 or SNMP v2c.
(Default: Version 1)
SNMP v3
User Name—The name of user connecting to the SNMP agent. (Range: 1-32 characters)
Security Level—The security level used for the user.
noAuthNoPriv—There is no authentication or encryption used in SNMP communications.
(This is the default for SNMPv3.)
AuthNoPriv—SNMP communications use authentication, but the data is not encrypted (only
available for the SNMPv3 security model).
AuthPriv—SNMP communications use both authentication and encryption (only available for
the SNMPv3 security model).
General Settings
UDP Port—Specifies the UDP port number used by the trap manager. (Range: 1-65535;
Default: 162)
Timeout—The number of seconds to wait for an acknowledgment before resending an inform
message. (Range: 0-2147483647 centiseconds; Default: 1500 centiseconds)
Retry times—The maximum number of times to resend an inform message if the recipient
does not acknowledge receipt. (Range: 0-255; Default: 3)
Enter a notification recipient based on an SNMPv1/v2 community string or an SNMPv3 user,
then click Add.
SRW2024P User Guide 108