Function Setting - Denon S-301 Operating Instructions Manual

Denon dvd home theater system operating instructions s-301
Hide thumbs Also See for S-301:
Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
Basic Operation
FUNCTION
DVD
TUNER
DVS/CINEMA
STATUS

Function setting

1
Press the
DVD
and
control unit to select the input function to be
played.
• The function switches as shown below.
VOLUME
(Main unit)
When the FUNCTION button on the main unit is pressed:
AUX
DVD
When the AUX button on the remote control unit is
pressed:
VOLUME
CURSOR
iPod, USB and Portable are only displayed and
selectable when the corresponding components is
connected.
2
Press the
surround mode.
• The surround mode switches as shown below each
time the SURROUND button is pressed.
DOLBY VS REF.
SURROUND
CURSOR
3
When "STEREO" is selected:
SURROUND
Press the
PARAMETER
then press the
4
Start playback on the selected component.
For operating instructions, refer to the component's manual.
FUNCTION
button on the main unit,
TUNER
AUX
,
or
button on the remote
(Remote control unit)
TUNER
iPod
USB
Portable
(Front IN)
AUX3
AUX2
AUX1
iPod
USB
Portable
(Front IN)
AUX3
AUX2
AUX1
SURROUND
button to select the
DOLBY VS WIDE
STEREO
JAZZ CLUB
ROCK ARENA
SURROUND PARAMETER
button,
CURSOR
0 or 1 button to set.
DIRECT ON OFF
31
ENGLISH
5
Adjust the volume.
(Main unit)
(Remote control unit)
The volume is shown on
the display.
The volume can be adjusted within the range –60 to 0 to
+18 dB. Note that depending on the input signal, surround
mode, speaker settings and channel level setting, it may not
be possible to adjust the volume up to +18 dB.
2 Surround parameters q
DIRECT MODE:
• ON:
The analog input signals are played without DSP processing.
The settings made at "DISTANCE" under "SETUP" (
page 54) are not reflected.
• OFF:
The analog input signals are converted into digital signals and
undergo DSP processing.
The "DIRECT MODE" only functions with analog inputs and
in the stereo mode.
2 To check the currently playing program
source, etc.
STATUS
Press the
button.
• The current program source and surround settings are shown
on the display each time the button is pressed.
2 Input signal display
• DOLBY DIGITAL
• DTS
Basic Operation

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents