About Digital Audio Signal Output; When A Disc Is Played On The S-301 (Digital Out) - Denon S-301 Operating Instructions Manual

ENGLISH
System Setup

About digital audio signal output

When a disc is played on the S-301 (DIGITAL OUT)

Linear PCM audio is the signal recording format used for music CDs.
While the signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to 96 kHz/24 bit, providing
higher sound quality than music CDs.
Audio recording format
Dolby Digital
DTS
DVD video
(video part
48 kHz
only)
96 kHz
CP : ON
CP : OFF
Video CD MPEG 1
Music CD Linear PCM
MP3/WMA CD MP3/WMA
Super Audio
DSD (DIRECT
CD
STREAM DIGITAL)
• Linear PCM audio is the signal recording format used for music CDs.
While the signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to 96 kHz/24 bit,
providing higher sound quality than music CDs.
Settings Page
DIGITAL OUT : NORMAL
DIGITAL OUT : PCM
51
DIGITAL OUT : NORMAL
DIGITAL OUT : PCM
LPCM (44.1 kHz/48 kHz) : OFF
LPCM (44.1 kHz/48 kHz) : ON
LPCM (44.1 kHz/48 kHz) : ON 52
LPCM (44.1 kHz/48 kHz) : OFF
LPCM (44.1 kHz/48 kHz) : OFF
Digital audio data output
Dolby Digital bitstream
2 channels PCM data (48 kHz/16 bit)
DTS bitstream
2 channels PCM data (48 kHz/16 bit)
48 kHz/16 ~24 bit PCM
48 kHz/16 bit PCM
48 kHz/16 bit PCM
48 kHz/16 bit PCM (when copy-protected)
96 kHz PCM (when not copy-protected)
44.1 kHz/16 bit PCM
44.1 kHz/16 bit PCM
32 ~ 48 kHz/16 bit PCM
No output data (44.1 kHz/16-bit PCM signals
are output during CD layer playback.)
63
ENGLISH
System Setup