Playing A Dvd Disc - Denon S-301 Operating Instructions Manual

ENGLISH
Easy Setup and Operation
5
ON/STANDBY

Playing a DVD disc

• Pick up the disc carefully so as not to touch the signal surface and hold it with the labeled side facing up.
• With the disc tray fully open, set the disc in the disc tray.
1
Check that all connections are correct.
2
Turn on your monitor (TV).
Switch the input selector on the TV to this unit.
2 1
VOLUME
3
Press the
• The power indicator lights blue, the power turns on and
the display lights.
Several seconds are required from the time the ON/STANDBY
switch is pressed until the power turns on. This is due to the
built-in muting circuit that turns off (mutes) the sound when
the power is turned on and off. The power indicator flashes
blue while the muting circuit is activated.
Even when the ON/STANDBY switch has been pressed again
and the power has been set to the standby mode, power is
still supplied to some circuits. When leaving home or
traveling, be sure to unplug the power supply cord from the
power outlet. In the standby mode, the power indicator is
lights red. The indicator is orange when the timer is set.
ON/STANDBY
1
2
VOLUME
MUTE
ON/STANDBY
switch.
13
ENGLISH
Easy Setup and Operation
4
Press the 5 5 button to set the DVD disc in the
disc tray.
5
Press the 5 5 button.
The disc tray can also be closed automatically to load the
disc by pressing the 1 1 button. After this, playback starts
automatically.
6
Press the 1 1 button.
Disc tray