Presetting Stations That Have Been Tuned In And Giving Names To Stations (For Remote Control Unit Only) - Denon S-301 Operating Instructions Manual

ENGLISH
Basic Operation
FUNCTION
NUMBER
MODE
MEMO
ENTER
DISPLAY
Presetting stations that have been tuned in
and giving names to stations (for remote
control unit only)
• A total of 60 stations (including both FM and AM stations) can
be preset.
• Preset stations can be given names with up to 8 characters
(letters, numbers and symbols).
• Preset stations using the including remote control unit.
1
Tune in the station you want to preset.
AUX
2
Press the
• The name input mode is set.
CURSOR
3
Press the
character, then press the
that character.
ENTER
CLEAR
When the CURSOR
character is entered, the cursor moves to the next position
CURSOR
and the next character can be input.
When the CURSOR
character is entered, the cursor moves to the previous
position. Use this to correct characters that have already
been input.
P0- FM 2.50M
MEMO
button twice in a row.
P0- _
CURSOR •
ª
or button to select the
ENTER
button to input
P0- F
P0- F_
button is pressed, the selected
1 1
button is pressed, the selected
0 0
27
ENGLISH
4
ENTER
Press the button to enter the station
name you have input.
• The preset number indicator, "P0– ", flashes.
P0- FM-DENON
5
CURSOR •
Press the or ª button to select the
preset number, then press the
enter the preset number.
• The preset number, band and reception frequency are
displayed, then the station name appears.
The preset number can also be input directly pressing the
NUMBER buttons on the remote control unit.
P03 FM-92.50M
P03 FM-DENON
• To stop in the middle of the procedure, press the MODE button
before pressing the ENTER button at step 4. Everything you
have input is cleared.
• To clear a station name that has been set in the memory, call
out that station, set the name input mode in step 2, then press
the CLEAR button. The station name is cleared and the preset
channel frequency is displayed.
• If you only want to preset a station, press the MEMO button
once while the station is tuned in. The preset number indicator,
"P0–", flashes, and the preset number input mode is set. Press
the CURSOR • or ª button to select the preset number, then
press the ENTER button again to store that station at the
selected number. (The number can also be specified directly
using the NUMBER buttons on the numeric keypad.)
Basic Operation
ENTER
button to