Playing And Recording Other Sources; Connecting The Portable Player; Playing A Portable Audio (Stereo Mini Plug); Connecting The Mass Storage - Denon S-301 Operating Instructions Manual

Basic Operation

Playing and recording other sources

Connecting the portable player

Your portable audio player can be connected to the ADV-S301's
portable jack to play tracks on the portable audio player.
Connect the ADV-S301 and portable audio player
using a separately sold mini-stereo audio cable.

Playing a portable audio (stereo mini plug)

1
FUNCTION
Press the button on the main unit or
AUX
button on the remote control unit to select
"IN Front IN".
IN Front
2 Play the portable audio player.
• The signals of the Portable Audio are output through the
S-301.
For instructions on playing the portable audio player, see the
portable audio player's operating instructions.

Connecting the mass storage

Your mass storage device can be connected to the ADV-S301's
USB connector to play MP3, WMA and WAV files on the mass
storage device.
PORTABLE
AUDIO LINE
OUT
Connect the ADV-S301 and mass storage device
using a separately sold mini-stereo audio cable.
• Compatible with mass storage devices in FAT16 or FAT32
format.
• If the mass storage device is divided into multiple partitions,
only the files on the drive with the lowest drive number on that
partition are selected.
• To disconnect the mass storage device, press the STOP button
and hold it in for at least 2 seconds, then disconnect the cable.
IN
NOTE:
• USB devices does not operate when connected via a USB
hub.
• Please note that operation of and power supply to all USB
mass storage devices is not guaranteed.
Playing a MP3, WMA or WAV file on the mass
storage
1
FUNCTION
Press the
AUX
button on the remote control unit to select
"IN USB".
MASS STORAGE
USB
button on the main unit or
IN USB
30
ENGLISH
2 The files on the mass storage device can be
played using the same operations as described
at "Listening to recorded MP3 or WMA CD-
R/CD-RW" ( page 22).
About analog recording onto an external
audio component (AUX3)
2 When the DVD is selected
Dolby Digital, DTS and PCM digital signals are automatically
converted to 2-channel stereo signals before being output
(except when in the Dolby Headphone mode) and can be
recorded in analog. (For what happens in the Dolby Headphone
mode, see below.)
2 When other functions (analog) are selected
(aside from "AUX3")
The analog audio signal selected from among the functions other
than DVD is output unchanged, regardless of the S-301's input
mode or surround mode.
NOTE:
Cautions during analog recording of DVDs or digital input
sources:
• Do not switch the S-301's input mode, surround mode or
surround parameters during recording. Doing so will
interrupt the sound being recorded.
We recommend setting the surround mode to "STEREO".
• When using headphones, recording is automatically
performed in the Dolby Headphone mode.
ENGLISH
Basic Operation