Playing The Ipod; Connecting The Ipod; Playback - Denon S-301 Operating Instructions Manual

Basic Operation
®

Playing the iPod

Connecting the iPod

Music on your iPod can be played by connecting the iPod to the
ADV-S301's iPod connector. The iPod can also be controlled with
the buttons on the remote control unit and on the main unit.
iPod is a trademark of Apple Computer, Inc.,
registered in the U.S. and other countries.
Connect to the ADV-S301's iPod
connector in this direction.
• Connect the included iPod cable directly to the iPod.
(Do not connect the ADV-S301 with the Dock.)
• Connect the ADV-S301 with the iPod with the marked side of
the connector facing up.
1
Connect the ADV-S301 and iPod using the
included iPod cable.
• Turn the iPod's power on.
2
FUNCTION
Press the button on the main unit or
AUX
button on the remote control unit to select
"IN iPod".
IN iPod
3
Turn on the TV's power. Set the TV's input
function to the ADV-S301 input.
iPod
Browse iPod
NOTE:
• With the S-301, only iPod equipped with an iPod Dock
connector port can be operated with the S-301's remote
control unit and the buttons on the main unit. If your iPod is
not equipped with an iPod Dock connector port, see
"Playing a portable audio" (
not possible to operate using the S-301's remote control
unit and the buttons on the main unit, but it is possible to
play the tracks on the iPod.
• If the screen in step 3 is not displayed, the iPod may not be
properly connected. Reconnect it.
• The maximum battery charge output from the iPod
connector is 8 W.
ENGLISH

Playback

1
2
• Depending on your iPod's software version, it may not be
possible to control your iPod from the S-301. We recommend
installing the latest software version.
• For information and instructions on upgrading to the latest
software version, see the Apple Computer, Inc. website.
iPod screen
• For iPods, only the
operate when in the "Remote iPod" mode.
• In the browse mode, when "Songs" is selected from the "TOP
MENU" while a track is playing, the track stops.
• In the "Remote iPod" mode, when the MENU button on the
remote control unit is pressed for 2 seconds to turn the
backlight off, the backlight may turn back on, depending on the
timing at which the button is released.
• When in the "Remote iPod" mode, the
remote control unit functions as the
For iPod operations, also refer to the iPod's operating
instructions.
page 30). In this case it is
28
CURSOR • ENTER
Use the , ª and
display the list of tracks.
ENTER
Press the button to play.
The display can be switched between title name, album
title, artist name, the elapsed time and the remaining time
by pressing the DISPLAY button.
1 1 , 2 2 , 3 3 , 8 8 , 9 9 , 6 6
button.
1 3 3 1
ENGLISH
Basic Operation
buttons to
and 7 7 buttons
button on the
1 1