Intel Q9300 - Core 2 Quad 2.5 GHz 6M L2 Cache 1333MHz FSB LGA775 Quad-Core Processor Datasheet page 22

capacitance, and 1 MΩ minimum impedance. The maximum length of ground wire on the
probe should be less than 5 mm. Ensure external noise from the system is not coupled into
the oscilloscope probe.
5. Refer to
a given current. The processor should not be subjected to any V
wherein V
6. I
CC_MAX
7. V
TT
specification is measured at the land.
8. Baseboard bandwidth is limited to 20 MHz.
9. This is the maximum total current drawn from the V
specification does not include the current coming from on-board termination (R
through the signal line. Refer to the Voltage Regulator Design Guide to determine the total
I
TT
tested.
10. Adherence to the voltage specifications for the processor are required to ensure reliable
processor operation.
22
Table 2-4 and Figure 2-1
exceeds V
CC CC_MAX
specification is based on V
must be provided via a separate voltage source and not be connected to V
drawn by the system. This parameter is based on design characterization and is not
for the minimum, typical, and maximum V
for a given current.
loadline. Refer to
CC_
MAX
plane by only the processor. This
TT
Electrical Specifications
allowed for
CC
and I combination
CC
CC
Figure 2-1 for details.
. This
CC
),
TT
Datasheet