Video; Input Mode; Control Unit - Denon AV SURROUND RECEIVER AVR-5308CI Owner's Manual

g Video
Setting the video source.
Video Select
Switch video input source while listening to audio signal.
[Selectable items]
DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUX
SOURCE
Operating from the main unit
VIDEO SELECT
Press the button, then turn the
until the desired picture appears.
VIDEO SELECT
b To cancel, press the main unit's
SOURCE SELECT
main unit's knob and select "SOURCE" .
NOTE
• It is not possible to select HDMI input signals.
• When playing HDMI video input signals, the analog video signal of
another input source cannot be selected for the HDMI video output.
• Input sources for which "Delete" is selected at "Source Delete"
cannot be selected.
Video Convert
Automatically convert video input signal to monitor output format.
[Input source]
DVD HDP TV/CBL SAT VCR DVR-1
OFF
ON
[Selectable items]
NOTE
• For optimum video performance, THX recommends that you set the
conversion mode to "OFF" to use video signals pass through system
without up conversion.
Example: The video input signals from the component video can
be enjoyed through the video output signals from the
component video.
• When a non-standard video signal from a game machine or some
other source is input, the video conversion function might not
operate. If this happens, please set the conversion mode to "OFF" .

i/p Scaler
Make settings for i/p scaler function.
[Selectable items] A to H
• This can not be set when "Video Convert" is set to "OFF" .
• The "A to H & H to H" can be set to the input source assigned to the
HDMI input connector.
• "A to H & H to H" setting:
Deep color (10 bit/12 bit) signals are converted into 8-bit signals.
•
The i/p scaler function does not work if xvYCC or computer's
•
resolution signals are input.
Resolution
SOURCE SELECT
knob
Make settings for resolution of HDMI video output signal.
button, then turn the
[Selectable items] Auto
Operating from the main unit
SCALE
Press the button.
Auto
• This can be set when "i/p Scaler" is set to anything other than
"OFF" .
• When the "i/p Scaler" is set to "A to H & H to H" , the resolutions can
be setup to the analog video input signal and HDMI input signal.
DVR-2 V.AUX
Progressive Mode
Select optimum progressive mode for video material.
[Selectable items] Auto
This can be set when "i/p Scaler" is set to anything other than "OFF" .
Aspect
This sets the aspect ratio when outputting 480i/576i or 480p/576p
input signals from the HDMI output connector.
[Selectable items]
This can be set when "i/p Scaler" is set to anything other than "OFF" .
A to H & H to H OFF
480p/576p 1080i 720p 1080p
480p / 576p 1080i
1080p 720p
Video1 Video2
Full Normal
h Input Mode
Make input mode and decode mode settings for this source.
The selectable input modes depend on the input source and
"Assign" setting (vpage 46, 47).

Input Mode

Set the input mode for this source.
(
[Input source] TUNER PHONO
[Selectable items] Analog EXT. IN
[Input source] NET/USB XM HD Radio
[Selectable items] Auto EXT. IN
[Input source]
CD DVD HDP TV/CBL SAT VCR
V.AUX
[Selectable items]
Auto HDMI Digital Analog EXT. IN
• When a digital signal is properly input, the "
the display. If the " " indicator does not light, check the digital
input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to "EXT.
IN" .
Operating from the main unit or main remote

control unit

INPUT MODE
Press the button on the main unit or the
on the main remote control unit.
Auto HDMI
EXT. IN Analog
z1: This can be selected for input sources for which the GUI menu
"Assign" setting is set to "HDMI" (vpage 46). Excluding CD.
z2: This can be selected for input sources for which the GUI menu
"Assign" setting is set to "Digital" (vpage 46).
)
iPod
DVR-1 DVR-2
" indicator lights on
INPUT
button
Digital