Listening To Fm/Am Broadcasts; Basic Operation; Presetting Radio Stations (Preset Memory) - Denon AV SURROUND RECEIVER AVR-5308CI Owner's Manual

<SOURCE SELECT>
<TUNING PRESET>
[ TU]
( mode)
[BAND]
[MODE]
[SEARCH]
[CHANNEL]
[TUNER],
(AMP mode)
[SHIFT]
About the button names in these explanations
< >
: Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit


Listening to FM/AM Broadcasts

Basic Operation

1 1
Either turn
(AMP mode) to select "TUNER". (AMP mode) to select "TUNER".
:
"Source Select" (vpage 43, 44)
2
To operate using the main remote control unit, set the
remote control unit to the TUNER (
(vpage 76 "Remote Control Unit Operations")
3
[BAND]
Press
4
Tune in the desired broadcast station.
q To tune in automatically (Auto Tuning)
[MODE]
Press to light the "AUTO" indicator on the display, then
[d f]
use to select the station you want to hear.
w To tune in manually (Manual Tuning)
[MODE]
[A ~ G]
Press to turn off the display's "AUTO" indicator, then use
[d f]
to select the station you want to hear.
[d f]
[MEMO]
• It is also possible to switch to "FM" or "AM" in step 1 by pressing
[TUNER]
.
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
frequencies continuously.
• The time for which the GUI menus are displayed can be set at GUI
menu "Manual Setup" – "Option Setup" – "GUI" – "Tuner" (vpage
[1 ~ 8]
40).
<SOURCE SELECT> [TUNER]
or press
) mode.
to select "FM" or "AM".
[d f]
to change
Presetting Radio Stations
(Preset Memory)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
1
Tune in the broadcast station you want to preset.
2
[MEMO]
Press .
3
[A ~ G]
Press to select the block in which the station is
[CHANNEL]
to be preset, then press
the preset number.
b The memory block can also be selected by pressing [SHIFT].
4
[MEMO]
Press again to complete the setting.
• To preset other stations, repeat steps 1 to 4.
• Stations can be preset automatically at GUI menu "Source Select"
– "TUNER" – "Auto Preset" (vpage 44).
NOTE
Preset stations are erased by overwriting them.
[1 ~ 8]
or to select