Video Conversion Function - Denon AV SURROUND RECEIVER AVR-5308CI Owner's Manual

Video Conversion Function

• This function automatically converts various formats of video signals input to the AVR-5308CI into the
format used to output the video signals from the AVR-5308CI to a monitor.
• The AVR-5308CI's video input/output circuitry is compatible with the following four types of video
signals:
Digital video signals: HDMI
Analog video signals: Component video, S-Video and Video
GFlow of video signals inside the AVR-5308CIH
MAIN ZONE
High picture
HDMI connector
quality playback
Component video
connectors
S-Video connector
Video connector
Video inputs
GFlow of video signals for ZONE2H
ZONE2
High picture
quality playback
Component video
connectors
S-Video connector
Video connector
Video inputs

HDMI connector
Component video Monitor
connectors
S-Video connector
Video connector
Video outputs
: When 480i/576i signals are input
Component video
ZONE2
connectors
monitor
S-Video connector
Video connector
Video outputs
GFlow of video signals for ZONE3H
ZONE3
High picture
quality playback
S-Video connector
Video connector
Video inputs
• When not using this function, connect a monitor output with the same type of connector as the video
input connector.
• The resolution of the HDMI input-compatible monitor connected to the AVR-5308CI can be checked at
GUI menu "Information" – "HDMI Information" – "Monitor1" or "Monitor2" (vpage 55).
NOTE
• For optimum video performance, THX recommends that you set the conversion mode to "OFF" to use
video signals pass through system without up conversion.
Example: The video input signals from the component video can be enjoyed through the video output
signals from the component video.
• HDMI signals cannot be converted into analog signals.
• 1080p component input video signals cannot be output to anything other than component video
connectors.
• 480p/576p, 1080i and 720p component video input signals cannot be converted into S-Video or Video
format.
• When using the component video output connectors for connection to the ZONE2 monitor, the ZONE2's
on-screen display is not displayed.
• When a non-standard video signal from a game machine or some other source is input, the video
conversion function might not operate.
ZONE3
monitor
Video connector
Video outputs