Setting The Time The Backlight Stays Lit; Adjusting The Backlight's Brightness; Resetting The Main Remote Control Unit - Denon AV SURROUND RECEIVER AVR-5308CI Owner's Manual

Signal transmission
indicator
[ AMP]
[SYSTEM CALL]
[CHANNEL+/–]
[NUMBER]

Setting the Time the Backlight Stays Lit

1
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
2
[9] [7] [3]
Press , and , in that order.
The signal transmission indicator flashes twice and the backlight
on time setting mode is set.
3
Set the light on time.
The signal transmission indicator flashes twice.
[1]
[Settable times] : : 5 sec.
[2]
: 10 sec. (Default)
[3]
: 15 sec.
[4]
: 20 sec.
[5]
: 25 sec.


Adjusting the Backlight's Brightness

The display's brightness can be adjusted in 5 steps.
(Default: Step 3)
1
[MODE Press and hold in
SELECTOR]
The signal transmission indicator flashes twice.
2
[CHANNEL +]
Press
The display gets one step brighter when
The display gets one step darker when
3
[RC SETUP]
Press

Resetting the Main Remote Control Unit

Learning Function
GResetting button by buttonH
1
[MODE SELECTOR]
Press
[RC SETUP]
reset.
2
Press and hold in
The signal transmission indicator flashes twice.
3
[9] [7]
Press ,
The signal transmission indicator flashes twice.
4
Press the button you want to reset twice.
The signal transmission indicator flashes twice.
GResetting by device modeH
1
[MODE SELECTOR]
Press
reset.
2
Press and hold in
The signal transmission indicator flashes twice.
3
[9] [7]
Press ,
The signal transmission indicator flashes twice.
4
[MODE SELECTOR]
Press
reset twice.
The signal transmission indicator flashes twice.
[RC SETUP]
for at least 3 seconds.
[CHANNEL –]
or .
[+]
is pressed.
[–]
is pressed.
to complete the setting.
for the device you want to
[RC SETUP]
for at least 3 seconds.
[6]
and , in that order.
for the device you want to
[RC SETUP]
for at least 3 seconds.
[6]
and , in that order.
for the device you want to
System call function
1
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
2
[9] [7] [8]
Press , and , in that order.
The signal transmission indicator flashes twice.
3
[SYSTEM CALL] 1 2 3
Press ( , or ) you want to reset.
4
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
Punch-through function
1
[MODE SELECTOR]
Press for the device you want to
reset (TV or SAT/CBL).
2
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
3
[9] [8] [4]
Press , and , in that order.
The signal transmission indicator flashes twice.
4
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
All settings
1
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
2
[9] [8] [1]
Press , and , in that order.
The signal transmission indicator flashes 4 times.
All the settings are restored to their defaults.