Channel Level; Fader Function; Quick Select Function - Denon AV SURROUND RECEIVER AVR-5308CI Owner's Manual

QUICK SELECT
CH SELECT
uio p
QUICK SELECT
uio p
About the button names in these explanations
< >
: Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit

Channel Level

You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.
1
CH SELECT
Press
2
Use ui or
The speaker that can be set switches each time one of the
buttons is pressed.
3
Use o p to adjust the volume.
b "OFF" can be set by pressing
is set to -12dB.

Fader Function

This function lets you adjust (fade) the sound from all the front or
rear speakers at once.
1
CH SELECT
Press
2
Press ui or
3
Use o p to adjust the volume of the speakers.
o p
( : front, : rear)
CH SELECT
• The fader function does not affect the subwoofer.
• The fader can be adjusted until the volume of the speaker adjusted
to the lowest value is –12 dB.
.
CH SELECT
to select the speaker.
o when the subwoofer's volume
.
CH SELECT
to select "Fader".

Quick Select Function

With this function, the currently playing input source, input mode,
surround mode, room EQ settings and volume can be stored in
the memory.
1
Set the input source, input mode, surround mode,
room EQ settings and volume to the conditions you
want to store.
2
QUICK SELECT
Press and hold the desired
Keep pressing the button until the quick select indicator lights.
[Quick Select Defaults]
Input Source
DVD
Quick Select 1
Quick Select 2 TV/CBL
Quick Select 3 VCR
QUICK SELECT
• To call out the settings, press
settings were stored.
• The Quick Select name can be changed (vpage 40).
NOTE
Input sources stored with the quick select function cannot be selected
if they have been deleted at GUI menu "Manual Setup" – "Option
Setup" – "Source Delete" (vpage 40). In this case, store them
again.
.
Volume
–40 dB
–40 dB
–40 dB
at which the desired