Convenient Functions; Hdmi Control Function - Denon AV SURROUND RECEIVER AVR-5308CI Owner's Manual

Convenient Functions

HDMI Control Function

When connecting the AVR-5308CI to a television or player compatible with the HDMI control function, the following operations are
possible.
Turn power ON/OFF (Synchronize with television)
•
Switch to sound output equipment (TV and AVR-5308CI)
•
Adjust volume
•
Switch input source
•
When using these functions set as follows: GUI menu "Manual Setup" – "HDMI Setup" – "HDMI Control" (vpage 33).
NOTE
When using the HDMI control function, do not assign HDMI input to "TV/CBL " by setting "Source Select" – "(input source)"
– "Assign" in the GUI menu.
Connections
Player compatible
with HDMI control
function

Television compatible with
HDMI control function
L R
L R
Operations
1
Connect the HDMI to the AVR-5308CI with equipment
compatible with the HDMI control function.
2
Put the power on for all the equipment connected to
the HDMI.
3
Check the settings for all the equipment connected to
the HDMI and make HDMI available to them.
b Please consult the operating instructions for the connected
equipment to check the settings.
b Operations 1-3 do not have to be repeated once started.
b Carryout Operations 2 and 3 should any of the equipment be
plugged out.
4
Switch the television input to the HDMI connected to
the AVR-5308CI.
5
Switch the AVR-5308CI input to the HDMI input
source and check if the picture from the player is ok.
6
Put the television power on standby and check if the
AVR-5308CI goes into standby.
If the AVR-5308CI does not work please check the following.
• Is the GUI menu "Manual Setup" – "HDMI Setup" – "HDMI Control"
– "Control" (vpage 33) set to "ON"?
• Is the GUI menu "Manual Setup" – "HDMI Setup" – "HDMI Control"
– "Control Monitor" (vpage 33) set for the monitor output
connected to television?
• Is the GUI menu "Manual Setup" – "HDMI Setup" – "HDMI Control"
– "Power Off Control" (vpage 33) set to "ON"?
• Is the control function used for the television HDMI properly set?
(Check the television operating instructions for details.)
• Should any of the operations below be performed, the interlocking
function may be reset, in which case, repeat Operation's 2 and 3.
GUI menu "Source Select" – "Assign" – "HDMI" (vpage 46)
•
setting has changed
There is a change to the connection between the equipment and
•
the HDMI, or an increase in equipment.
AVR-5308CI GUI menu "Manual Setup" – "HDMI Setup" – "Monitor
•
Out" (vpage 33) is changed.