Connecting The Recording Components; Digital Video Recorder - Denon AV SURROUND RECEIVER AVR-5308CI Owner's Manual

Connecting the Recording Components

Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly.

Digital Video Recorder

Connect the cables to be used.
Digital video recorder
L R L R
L R L R
• Make analog connections if you wish to record analog audio signals.
• When recording to a digital video recorder, it is necessary that the
type of cable used with the playback source equipment be the same
type that is connected to the AVR-5308CI DVR-1 OUT connector.
Example: TV IN → S-Video cable : DVR-1 OUT → S-Video cable
TV IN → Video cable : DVR-1 OUT → Video cable
• Connect a DVR-2 in the same way.
• When using a component video cable or a BNC cable for the
component video connection, make the settings at GUI menu
"Source Select" – "DVR-1" or "DVR-2" – "Assign" – "Component"
(vpage 47).
NOTE
• Do not connect the output of the component connected to the AVR-
5308CI's OPTICAL2 output connector to any input connector other
than OPTICAL2.
• Do not connect the output of the component connected to the AVR-
5308CI's OPTICAL3 output connector to any input connector other
than OPTICAL3.