Thx Audio Setup; Surround Speaker - Denon AV SURROUND RECEIVER AVR-5308CI Owner's Manual

• Please set all THX Certified speakers, set the "Speaker Configuration"
for all speakers to "Small". We recommend using with the crossover
frequency set to "FIXED–THX–", but depending on the speaker,
setting it to a different frequency may improve frequency response
near the crossover frequency.
• The "Crossover Frequency" can be set when there are speakers
that have been set to "Small" at GUI menu "Speaker Configuration"
– "Speaker Configuration" or when "Subwoofer" is set to "Yes"
(vpage 30).
• At the "Advanced" settings, if the GUI menu "Subwoofer Setup"
(vpage 30) setting is set to "LFE–THX–" , speakers for which
"Speaker Configuration" is set to "Small" can be set. If set to
"LFE+Main" , the setting can be made regardless of the speaker
size.
• For speakers set to "Small" , sound below the crossover frequency
is cut from the sound output. The cut bass sound is output from the
subwoofer or front speakers.
h THX Audio Setup
Set the speaker to play the optimal THX surround mode.
THX Ultra2 Subwoofer
Set when using a subwoofer compatible with THX Ultra2 standards or
a subwoofer that can be properly played at low range.
[Selectable items] Yes No
Make these settings when "Yes" is selected for the subwoofer in the
"Speaker Configuration" settings. This option is not available when
"No" is selected (vpage 30).
BGC (Boundary Gain Compensation)
Adjust the bass volume when it feels too strong.
[Selectable items] ON OFF
• If the bass sound seems too strong:
Set "BGC" to "ON" . This activates a filter that gently reduces very
deep bass below 55 Hz to provide the flattest overall deep bass
response. Select "ON" or "OFF" according to how strong you prefer
the deep bass response to be.
• This can be set when the "THX Ultra2 Subwoofer" setting is set to
"Yes".
SB Speaker Position
Set the distance between the left and right surround back speakers.
[Selectable items] Under 1ft 1ft – 4ft Over 4ft
• When two surround back speakers have been set in "Speaker
Configuration" (vpage 30), set the distance of the speakers. This
option is not available when "1spkr" is selected.
• This setting is necessary to achieve the optimum effect in the THX
Surround EX, THX Ultra2 Cinema, THX Music mode and THX Games
mode.
j Surround Speaker
Select surround speakers to use for each surround mode.
THX/DOLBY/DTS Cinema
[Selectable items] A B A+B
THX/DOLBY/DTS Music
[Selectable items] A B A+B
THX/DOLBY Game
[Selectable items] A B A+B
WIDE SCREEN
[Selectable items] A B A+B
7CH STEREO
[Selectable items] A B A+B
DSP SIMULATION
[Selectable items] A B A+B
MULTI CH MODE
[Selectable items] A B A+B
Operating from the main remote control unit
Press the SPKR button.
Surround A Surround B
Surround A+B
• This can be set when GUI menu "Speaker Configuration" – "Surround
A" and "Surround B" are used (vpage 30).
• When using the pre-out connectors, select and use either "Surround
A" or "Surround B" .
• Make the surround speaker settings when the input mode is set to
"EXT. IN" at GUI menu "Manual Setup" – "Audio Setup" – "EXT. IN
Setup" (vpage 34).
About Speaker Type Setting when Using Both
Surround speakers A and B
If "Small" is set for either surround speakers A or B, the output is the
same as when "Small" is set for both A and B.