Amp Assign; Volume Control; Source Delete; Gui - Denon AV SURROUND RECEIVER AVR-5308CI Owner's Manual

Amp Assign

a
Define how the amplifier for the surround and/or surround back
speaker channels is used.
The places where the surround amplifier and surround back amplifier
are used can be set freely according to the usage environment. This
makes it possible to output sound to rooms other than the room
(the MAIN ZONE) where surround playback is performed (multi-zone
playback) or play the sound with high quality using the front speakers
(bi-wiring/bi-amp connections).
[Selectable items]
Normal ZONE2 ZONE3 ZONE(MONO) Bi-Wiring
Bi & ZONE2 Bi & ZONE3 Bi & ZONE(MONO) Bi-Amp
ZONE2/ZONE3 ZONE2/3(MONO) 2CH Bi-Wiring
2CH Bi-Amp Free Assign
For details, see "Amp Assign / Multi-Zone Connections and Operations"
(vpage 85 ~ 88).
s Volume Control
Set the MAIN ZONE volume setting.
Volume Limit
Make a setting for maximum volume.
[Selectable items] OFF –20dB –10dB
Power On Level
This sets the volume set when the MAIN ZONE's power is turned on.
[Selectable items] Last – – –
–80dB ~ 18dB
Mute Level
This sets the amount of attenuation of the volume when the mute
mode is set in the MAIN ZONE.
[Selectable items] Full –40dB –20dB
d Source Delete
Remove input sources that are not used from the display.
[Selectable items]
NOTE
• Input sources being used in the various zones cannot be deleted.
• Input sources set to "Delete" cannot be selected from GUI menu
"Source Select" or using the
SOURCE SELECT
or button on the remote control unit.
f GUI
Make GUI related settings.
Screensaver
Make screensaver settings.
Use the screensaver to prevent burn-in on the monitor screen.
When set to "ON" , the screensaver is activated if there is no activity
for about 3 minutes.
[Selectable items]
Wall Paper
Change the GUI background.
[Selectable items] Picture Black
Format
0dB
Select the video output signal format to match the monitor.
[Selectable items] NTSC
NOTE
When a format other than the video format of the connected monitor
is set, the picture will not be displayed properly. Use the procedure
described below to change the video format.
ON Delete
SOURCE SELECT
knob on the main unit
ON OFF
Gray Blue
PAL
Operating from the main unit
b The GUI menu is not displayed when performing this setting.
AUDIO DELAY RETURN
q Press and hold the and
seconds.
"Video Format" appears on the display.
w Use the o p button to make the setting.
ENTER MENU RETURN
e Press the , or button to complete the
setting.
Text
Text information display.
[Selectable items] ON OFF
Master Volume
Master volume display during adjustment.
[Selectable items] ON OFF
NET/USB / iPod / Tuner
This sets the time the on-screen display is displayed when an operation
is performed.
30s 10s
[Selectable items] Always
g Quick Select Name
Change the Quick Select name.
Up to 16 characters can be input.
[Input characters]
A ~ Z a ~ z 0 ~ 9 ! " # % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] (space)
buttons for at least 3
OFF
0