Quick Select Function; Personal Memory Plus Function; Last Function Memory; Backup Memory - Denon AVR-3808CI Owner's Manual

<STANDARD> <DSP SIMULATION>
<POWER>
QUICK SELECT
About the button names in these explanations
< >
: Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit


Quick Select Function

With this function, the currently playing input source, input
mode, surround mode, room EQ settings and volume can
be stored in the memory.
1
Set the input source, input mode, surround mode,
room EQ settings and volume to the conditions you
want to store.
2
Press and hold the desired
Keep pressing the button until the quick select indicator lights.
QUICK SELECT
[Quick Select Defaults]
Quick Select 1
Quick Select 2
Quick Select 3
• To call out the settings, press QUICK SELECT at which the desired
settings were stored.
• The Quick Select name can be changed (vpage 34).
NOTE
Input sources stored with the quick select function cannot be selected
if they have been deleted at GUI menu "Manual Setup" – "Option
Setup" – "Source Delete" (vpage 34). In this case, store them
again.
The surround parameters, tone control, room EQ settings and the
QUICK SELECT
.
volumes of the different speakers are stored for the individual surround
modes.
Input Source Volume
DVD –40 dB
TV/CBL –40 dB
VCR –40 dB

Personal Memory Plus Function

This function sets the settings (input mode, surround
mode, etc.) last selected for the individual input sources.
When you switch to an input source, the settings are
automatically set to the ones that were set the last time
that input source was used.

Last Function Memory

This stores the settings as they were directly before the
standby mode was set.
When the power is turned back on, the settings are
restored to as they were directly before the standby mode
was set.

Backup Memory

The various settings are backed up for about 1 week,
even if the power is turned off or the power cord is
disconnected.