Multi-Zone Settings And Operations With Zone Pre-Out Output - Denon AVR-3808CI Owner's Manual

Setting 4 :
Making bi-amp connections for the FL and FR channels in the main zone
F
and conducting 5.1-channel playback
(switching with other modes not possible)
Main zone
FL SW
C FR
5.1ch
Amp Assign mode:
FL/FR
SL SR
Bi-Amp
Bi-Amp
A A
B B
Both A and B can be installed for SR and SL.
n Amp Assign mode setting and speakers connected to the various speaker
terminals
Speaker terminal
FRONT
CENTER
R L
Amp Assign mode
Bi-Amp FR FL
SURR. BACK /
SURR-A SURR-B
AMP ASSIGN
R L R L R
FR
FL/FR Bi-Amp
C SR-A SL -A SR-B SL -B
connection
Remote
Multi-Zone Settings and Operations with Zone Pre-out
control unit
Output
Prepare power amplifiers for ZONE2 and ZONE3.
Connectors for audio output
ZONE2 ZONE2 PRE OUT
ZONE3 ZONE3 PRE OUT
Main zone (7.1-channel system)
Monitor
AVR-3808CI
DVD player
Input
L
Remote
FL
control unit
• When only using one speaker for ZONE2 or ZONE3, set to "Mono" . In this case, the ZONE2 (ZONE3)
monaural output is output from the ZONE2 (ZONE3) pre-out L and R connectors, so connect as desired.
• Separate power amplifiers are needed for ZONE2 and ZONE3.
Audio signals Connectors for video output
Stereo ZONE2 VIDEO OUT
Stereo
ZONE2
Monitor
Power amplifier
ZONE2
video output
ZONE2
audio output
ZONE3
Power amplifier
ZONE3 audio output
: Multi-zone video cable
: Multi-zone audio cable
–
0