A1 Antenna Aiming; Surround Modes; Standard Playback; Surround Playback Of 2-Channel Sources - Denon AVR-3808CI Owner's Manual

A1 Antenna Aiming
Adjust the XM radio reception sensitivity.
[Input source] XM
Satellite
Indicate satellite signal strength.
Terrestrial
Indicate terrestrial signal strength.
Display Condition
Signal strength is strong
¡¡¡¡
Signal strength is good
¡¡¡
Signal strength is marginal
¡¡
Signal strength is weak
¡
No signal

Surround Modes

Standard Playback

This is the standard mode for enjoying surround sound
according to the program source.

Surround Playback of 2-channel Sources

To select these surround modes using the buttons on the main unit
and main remote control unit, press the STANDARD button. The mode
switches each time the button is pressed.
• When using a surround back speaker
[Selectable items]
DOLBY PLgx DTS NEO:6
• When not using a surround back speaker
[Selectable items]
DOLBY PLg DTS NEO:6
DOLBY PLgx
: The signals are decoded in DOLBY PLgx or
DOLBY PLg
or DOLBY PLg for playback.
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
Game
: This mode is suited for games.
Pro Logic
: This is the Pro Logic playback mode. This can
be selected when playing with a DOLBY PLg
decoder. When this mode is selected, "DOLBY
PL " is displayed.
DTS NEO:6
: The signals are decoded in DTS NEO:6 for
playback.
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
neural
: It is possible to play analog input signals and
PCM (2-channel, 48 kHz or less) in the surround
mode.
This is the optimum mode for playing sources
recorded in XM HD Surround (vpage 74).
Select the "Cinema" , "Music" , "Game" and "Pro Logic" modes at GUI
menu "Parameter" – "Audio" – "Surround Parameters" – "Mode"
(vpage 41).
Playing Multi-channel Sources
(Dolby Digital, DTS, etc.)
[Selectable items]
STANDARD
:
This mode is for decoding the input signals according to their format
and playing surround sound.
The display when the STANDARD mode is selected depends on the
input signal and surround back output playback mode.
Input signal
DOLBY DIGITAL
(other than 2ch) /
Dolby
DOLBY DIGITAL
neural
Digital
EX
Source DOLBY DIGITAL
Plus
neural
DOLBY TrueHD
DTS (5.1ch) /
DTS-ES Discrete
6.1 /
DTS-ES Matrix
DTS
6.1 /
Surround
DTS 96/24
Source
DTS-HD High
Resolution Audio
DTS-HD Master
Audio
DVD-
PCM (multi ch) /
Audio,
DSD (multi ch)
SACD
z1 : This is displayed when the input signal is "DTS-ES Matrix 6.1"
and the AVR-3808CI's "AFDM" setting is set to "ON" .
z2 : This is displayed when the input signal is "DTS-ES Discrete
6.1" .
z3 : This is displayed when the input signal is "DTS 96/24" .
For details, see page 77 .
Display
DOLBY DIGITAL
DOLBY DIGITAL EX
DOLBY DIGITAL+PLgx CINEMA
DOLBY DIGITAL+PLgx MUSIC
+
DOLBY DIGITAL
DOLBY TrueHD
DTS SURROUND
DTS+PLgx CINEMA
DTS+PLgx MUSIC
DTS+NEO:6
DTS ES MTRX6.1 (z1)
DTS ES DSCRT6.1 (z2)
DTS 96/24 (z3)
DTS-HD HI RES
DTS-HD MSTR
MULTI CH IN
MULTI IN+PLgx CINEMA
MULTI IN+PLgx MUSIC
MULTI CH IN 7 .1
0