Ipod ® Playback; Basic Operation; Listening To Music; Viewing Still Pictures Or Videos On The Ipod - Denon AVR-3808CI Owner's Manual

iPod ® Playback
The music on an iPod can be played by using the Control
Dock for iPod (ASD-1R, sold separately).
The operation can also be performed using the buttons on
the main unit or remote control unit while watching the GUI
menus.
iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
b The iPod may only be used to copy or play contents that are not
copyrighted or contents for which copying or playback is legally
permitted for your private use as an individual. Be sure to comply
with applicable copyright legislation.

Basic Operation

1
Make the necessary preparations.
q S et the iPod in the DENON Control Dock for iPod.
(vSee the Control Dock for iPod's operating instructions.)
w Assign the Control Dock for iPod's input. w Assign the Control Dock for iPod's input.
: "Source Select" – "(input source)" – "Assign"–
"iPod dock" (vpage 39)
2
<SOURCE SELECT>
Either turn or press
mode) to select the input source assigned in step 1-w
above.
OK to disconnect.
(iPod screen)
b If the screens above are not displayed, the iPod may not be
properly connected. Try connecting again.
: "Source Select" – "(input source)" – "Play"
(vpage 37)
3
To operate using the main remote control unit, set the
remote control unit to the iPod mode.
(vpage 59 "Remote Control Unit Operations")
• With the default settings, the iPod can be used connected to the VCR
(iPod) connector.
• Use the RESTORER mode to expand the low and high frequency
components of compressed audio fi les and achieve a richer sound.
The default setting is "Mode3" .
• Press <ON/STANDBY> and set the AVR-3808CI's power to the standby
mode before disconnecting the iPod. Also switch the input source
to one to which the GUI menu "iPod dock" is not assigned before
disconnecting the iPod.
NOTE
• Depending on the type of iPod and the software version, some
functions may not operate.
• DENON will accept no responsibility whatsoever for any loss of iPod
data.

Listening to Music

1
Use ui to select the menu, then press
to select the music fi le to be played.
2
ENTER
Press or p
Playback starts.
[iPod]
(AMP
Stopping playback temporarily
During playback, press ENTER or [1].
Press again to resume playback.
Fast-forwarding or fast-reversing
During playback, either press and hold u (to fast-reverse) or i (to fast-
forward), or press [6] or [7].
To cue to the beginning of a track
During playback, either press u (to cue to the previous track) or i (to
cue to the next track), or press [8] or [9].
To stop
During playback, either press and hold ENTER or press [2].
Playing repeatedly
Press [CHANNEL –] or [REPEAT] on the sub remote control unit.
[Selectable items] All
: "Source Select" – "(input source)" –
"Playback Mode (iPod)" – "Repeat" (vpage 38)
ENTER
or p
.
One OFF
Shuffl ing playback
Press [CHANNEL +] or [RANDOM] on the sub remote control unit.
[Selectable items] Albums Songs OFF
: "Source Select" – "(input source)" –
"Playback Mode (iPod)" – "Shuffl e" (vpage 38)
Searching up or down pages
Press [SEARCH], then press o (down) or p (up).
To cancel, press ui or [SEARCH].
To switch between the Browse and Remote modes
Either press and hold [SEARCH].
• The title name, artist name and album name can be checked by
pressing <STATUS> during playback.
• On the AVR-3808CI, folder and fi le names can be displayed as
titles. Any characters that cannot be displayed are replaced with " .
(period)" .
• The time for which the GUI menus are displayed can be set at GUI
menu "Manual Setup" – "Option Setup" – "GUI" – "iPod" (vpage
34).
Viewing Still Pictures or Videos on the
iPod
Photo and video data on the iPod can be viewed on the
monitor. (Only for iPod equipped with slideshow or video
functions.)
1
[SEARCH]
Press and hold to set the Remote mode.
"Remote iPod" is displayed on the AVR-3808CI's display.
2
Watching the iPod's screen, use
"Photos" or "Videos".
3
ENTER
Press until the image you want to view is
displayed.
"TV Out" at the iPod's "Slideshow Settings" or "Video Settings" must
be set to "On" in order to display the iPod's photo data or videos on
the monitor. For details, see the iPod's operating instructions.
ui to select
0