Multi-Zone Operations; Turning The Power On And Off; Selecting The Input Source; Adjusting The Volume - Denon AVR-3808CI Owner's Manual

<SOURCE SELECT> <ZONE3 ON/OFF> <VOLUME>
<ZONE2 ON/OFF>
<ZONE2/3 / REC SELECT>
[ AMP]
[ON]
[OFF]
(ZONE2
mode)
VOLUME
[MUTE]
SOURCE
SELECT
(Main remote control unit)
[ZONE SELECT]
[OFF]
[ON]
SOURCE SELECT
(Sub remote control unit)
About the button names in these explanations
< > : Buttons on the main unit
[ ]
: Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit


Multi-Zone Operations

Turning the Power On and Off

GOperation on the main unitG
Press <ZONE2 ON/OFF>, <ZONE3 ON/OFF> for the zone to be operated.
When the power turns on, the multi-zone indicator lights on the
display.
GOperation on the remote control unitG
In the zone mode you want to operate, press [ON] or [OFF].

Selecting the Input Source

GOperation on the main unitG
q Press <ZONE2/3 / REC SELECT> and select the zone to be adjusted.
w Turn <SOURCE SELECT>.
GOperation on the remote control unitG
In the zone mode you want to operate, press [SOURCE SELECT].
[ON]
[OFF]

Adjusting the Volume

(ZONE3
mode)
GOperation on the main unitG
q Press <ZONE2/3 / REC SELECT> and select the zone to be adjusted.
w Turn <VOLUME> to adjust.
GOperation on the remote control unitG
In the zone mode whose volume you want to adjust, press [VOLUME].
[Variable range] – – – –70dB ~ –40dB ~ +18dB
The volume can be adjusted when GUI menu "Manual Setup" – "Zone
Setup" – "(select the zone)" – "Volume Level" is set to "Variable" . The
volume can be increased up to the value set at GUI menu "Manual
Setup" – "Zone Setup" – "(select the zone)" – "Volume Limit"
(vpage 33).

Turning off the Sound Temporarily

In the zone mode for which you want to mute the sound, press
[MUTE].
The sound is reduced to the level set at GUI menu "Manual Setup"
– "Zone Setup" – "(select the zone)" – "Mute Level" (vpage 33).
To cancel, either adjust the volume or press [MUTE] again.
The setting is canceled when the zone's power is turned off.
• The source selected for ZONE2 is also output from the recording
output connectors.
• For ZONE2, the "Zone Setup" can be made while watching the on-
screen display. Also, when ZONE3 is operated, the on-screen display
appears on the ZONE2 monitor, so operation can be performed
watching this on-screen display.
ZONE2 MENU
ZONE2 MENU
INPUT :DVD
SIGNAL:ANALOG
>Channel
VOL. :-40dB
Vol.Lev.
Vol.Limit
>Bass 0dB
P.On Lev.
Treble 0dB
Mute Lev.
HPF OFF
Lch Lev. 0dB
Rch Lev. 0dB
NOTE
• When the input source to which the digital input connectors
(OPTICAL/COAXIAL) are assigned is selected in ZONE2 or ZONE3,
playback is only possible if the digital signal being input is in PCM
(2-channel) format.
• Digital audio signals input from the DENON LINK or HDMI connectors
cannot be played in multi-zone.
• When certain digital signals are being input, noise may be output
from the ZONE2 and ZONE3 audio output connectors.
• When "DENON LINK" is assigned at the GUI menu "Assign" setting,
the PCM signals, network audio signals (Internet radio, music server
and USB), XM signals input from the digital input connectors cannot
be output from the ZONE2 and ZONE3 audio output connectors.
STEREO
VAR
OFF
LAST
FULL