Denon AVR-3808CI Owner's Manual page 87

Denon home theater system - av surround receiver user manual
Hide thumbs Also See for AVR-3808CI:
Table of Contents

Advertisement

GiPodG
Symptom
Cause
iPod cannot be
• The input source assigned to
played.
"iPod dock" is not selected.
• Cable is not properly connected.
• Control Dock for iPod's AC
adapter is not connected to
power outlet.
GNET/USBG
Symptom
Cause
When a USB
• The set cannot recognize a USB
memory device is
memory device.
connected, "USB"
• A USB memory device not
is not displayed on
conforming to mass storage class
the GUI menu.
or MTP standards is connected.
• The set port and the connected
port do not match.
• A USB memory device that
the set cannot recognize is
connected.
• USB memory device is connected
via USB hub.
Files on a USB
• USB memory device is in format
memory device
other than FAT16 or FAT32.
cannot be played.
• USB memory device is divided
into multiple partitions.
• Files are stored in a non-
compatible format.
• You are attempting to play a file
that is copyright protected.
The file names
• Characters
that
cannot
are not displayed
displayed are used.
properly (" ... " , etc.).
Countermeasure
Page
• Switch to the input source
39
assigned at "iPod dock" .
• Reconnect.
13
• Plug the Control Dock for iPod's
AC adapter into a power outlet.
Countermeasure
Page
• Check the connection.
• Connect a USB memory device
conforming to mass storage
class or MTP standards.
• Connect to the port set at "USB
Select" .
• This is not a malfunction. DENON
does not guarantee that all USB
memory devices will operate or
receive power.
• Connect the USB memory device
directly to the USB port.
• Set the format to FAT16 or
FAT32. For details, refer to the
USB memory device's operating
instructions.
• When
divided
into
multiple
partitions, only files stored in the
top partition can be played.
• Record the files in a compatible
format.
• Files that are copyright protected
cannot be played on this set.
be
• This is not a malfunction. On
this set, characters that cannot
be displayed are replaced with a
" . (period)" .
Symptom
Internet radio
• Ethernet cable is not properly
cannot be played.
connected
disconnected.
• Program is being broadcast in
non-compatible format.
• The
computer's
firewall is activated.
• Radio station is not currently
broadcasting.
• IP address is wrong.
18
Files stored on a
• Files are stored in a non-
computer cannot
compatible format.
be played.
• You are attempting to play a file
that is copyright protected.
• Set and computer are connected
39
by USB cable.
Server is not
• The
computer's
found, or it is
firewall is activated.
not possible to
• Computer's power is not turned
connect to the
on.
server.
• Server is not running.
• Set's IP address is wrong.
Cannot connect to
• Radio station is not currently
preset or favorite
broadcasting.
radio stations.
• Radio station is not currently in
service.
For some
• Station is congested or not
radio stations,
currently broadcasting.
51
"Server Full"
or "Connection
51
Down" is
displayed and
station cannot be
connected to.
Sound is broken
• Network's signal transfer speed
during playback.
is slow or communications lines
or radio station is congested.
Sound quality is
• File being played has a low bit
poor or played
rate.
sound is noisy.
Cause
Countermeasure
• Check the connection status.
or
network
is
• Only Internet radio programs in
MP3 and WMA can be played on
this set.
or
router's
• Check the computer's or router's
firewall settings.
• Choose a radio station that is
currently broadcasting.
• Check the set's IP address.
• Record in a compatible format.
• Files that are copyright protected
cannot be played on this set.
• The set's USB port cannot
be used for connection to a
computer.
or
router's
• Check the computer's or router's
firewall settings.
• Turn on the power.
• Launch the server.
• Check the set's IP address.
• Wait a while before trying again.
• It is not possible to connect to
radio stations that are no longer
in service.
• Wait a while before trying again.
• This is not a malfunction. When
playing broadcast data with a
high bit rate, the sound may
be broken, depending on the
communications conditions.
• This is not a malfunction.
Page
20
51
52
32
51
51
32


Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-3808

Table of Contents