Quick Select Function; Personal Memory Plus Function - Denon AVR-1908 Owner's Manual

ENGLISH
if the
Set the input source, input mode, surround mode,
room EQ settings and volume to the conditions you
want to store.
[Quick Select Defaults]
InDut Source Volume
Quick Select 1
DVD/HDP -40 dB
Quick Select 2
TV/CBL
-40 dB
Quick Select 3
VCR -40 dB
2
Press and hold the desired
<QUICK SELECT>
until
''Memory'' appears on the display.
<SPEAKER A> <SPEAKER B>
<POWER> <QUICK SELECT>
About the button names in these explanations
<
> : Buttons on the main unit
[ I :
Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
(")
o
::l
::l
' "
~
o·
::l
..
I
$:
"
~
N
o
::l
' "
• To call out the settings, press <QUICK SELECT> at which the desired
settings were stored.
• The Quick Select name can be changed (GT'page 301.
·N·jj·
Input sources stored with the quick select function cannot be selected
if they have been deleted at menu "Manual Setup" - "Option Setup"
- "Source Delete" (&page 29). In this case, store them again.
1
10m off the power using
<POWER>.
2
Press
<POWER>
while simultaneously pressing
<SPEAKER
A>
and
<SPEAKER B>.
3
Once the display starts Dashing at intervals of about 1
second, release the two buttons.
Personal Memory Plus Function
This function sets the settings (input mode, surround mode, etc..}
last selected for the individual input sources.
When you switch to an input source, the settings are .automatically
set to the ones that were set the last time that input source was
used.
If in step 3 the display does not flash at intervals of about 1 second,
start over from step 1.
;:;
....
The surround parameters, tone control, room EQ settings and the
volumes of the different speakers are stored for the individual surround
modes.
47