Connecting Equipment With Hdmi Connectors - Denon AVR-3808CI Owner's Manual

Denon home theater system - av surround receiver user manual
Hide thumbs Also See for AVR-3808CI:
Table of Contents

Advertisement

Connecting Equipment with HDMI connectors

With HDMI connections, the video and audio signals can be transferred with a single cable.
DVD player
Monitor
b The AVR-3808CI is equipped for HDMI version 1.3a.
b The AVR-3808CI is compatible with 30- and 36-bit Deep
• By default, the HDMI audio signals are output from the speakers connected to the AVR-3808CI.
• To output the sound from the TV, make the settings at GUI menu "Manual Setup" – "HDMI Setup"
– "Audio" – "TV" (vpage 30).

This version is compatible with other versions, allowing
connection to all components equipped with an HDMI
connector.
Color.
Compatible
Details
audio format
(examples)
2-channel linear
2ch 32-192 kHz
CD, DVD-Video,
PCM
16/20/24 bits
DVD-Audio
Multi-channel
8ch 32-192 kHz
DVD-Audio
linear PCM
16/20/24 bits
Dolby Digital, DTS Bitstream
DVD-Video
2/5.1ch
DSD
2.8224 MHz
SACD
1 bit
Dolby Digital Plus,
HD DVD,
Dolby TrueHD,
Bitstream
Blu-ray Disc
DTS-HD
Copyright protection system (HDCP)
In order to play the digital video and audio signals of a DVD-
Video or DVD-Audio disc using HDMI/DVI connections, both
the connected DVD player and monitor must be equipped
for a copyright protection system called "HDCP" (High-
bandwidth Digital Content Protection).
HDCP is a copy protection technology consisting of data
encoding and mutual identification of the devices.
The AVR-3808CI is HDCP-compatible. For details on the
DVD player or monitor you are using, refer to its operating
instructions.
NOTE
• Use a CPPM-compatible DVD player to play DVD-Audio discs that are copyright-protected by CPPM.
• The AVR-3808CI cannot be controlled from another device via the HDMI cable.
• The audio signals output from the HDMI connector (sampling frequency, bit rate, etc.) may be restricted
by the connected device.
• Video signals are not output properly when using devices that are not HDCP-compatible.
• Video signals are not output if the input video signals do not match the monitor's resolution. In this case,
switch the DVD player's resolution to a resolution with which the monitor is compatible.
• If the GUI menu "Manual Setup" – "HDMI Setup" – "Audio" setting (vpage 30) is set to "Amp" , the
sound may be interrupted when the monitor's power is turned off.
Discs
• Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the HDMI
connector. Normal playback may not be possible when using a cable other than one on which the HDMI
logo is indicated (a non-HDMI-certified product).
• If the monitor or DVD player does not support deep color, deep color signal transfer is not possible.
• If the monitor or DVD player does not support xvYCC, xvYCC signal transfer is not possible.
• If the monitor does not support "Auto Lipsync Correction" function, this function will not work.
• When the AVR-3808CI and DVD player are connected using an HDMI cable, also connect the AVR-3808CI
and monitor using an HDMI cable.
• If the connected monitor or DVD player only has a DVI-D connector, use an HDMI/DVI converter cable.
When using a DVI cable, no audio signals are transmitted.
• Use a Deep Color compatible cable for connection to Deep Color compatible devices.
When connecting with an HDMI/DVI converter cable (adapter)
• HDMI video signals are theoretically compatible with the DVI format.
When connecting to a monitor, etc., equipped with a DVI-D connector, connection is possible using an
HDMI/DVI converter cable, but depending on the combination of components in some cases the video
signals will not be output.
• When connecting using an HDMI/DVI converter adapter, the video signals may not be output properly
due to poor connections with the connected cable, etc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-3808

Table of Contents