Denon AVR-3808CI Owner's Manual page 89
Denon home theater system - av surround receiver user manual
Hide thumbs
Also See for AVR-3808CI:
- Service manual (216 pages) ,
- Control protocol (44 pages) ,
- Owner's manual (22 pages)
Table of Contents
Advertisement
Specifications
n
Audio section
• Power amplifier
Rated output:
Front:
130 W + 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround (A + B):
130 W + 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround back:
130 W + 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
140 W x 2ch (8 Ω/ohms)
Dynamic power:
210 W x 2ch (4 Ω/ohms)
Output connectors:
Front, Center, Surround back
Surround: A or B
• Analog
200 mV / 47 kΩ/kohms
Input sensitivity / Input impedance:
Frequency response:
10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)
S/N:
102 dB (IHF-A weighted, DIRECT mode)
Distortion:
0.005 % (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output:
1.2 V
• Digital
D/A output:
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 96 dB
Digital input:
Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
2.5 mV
±1 dB (20 Hz to 20 kHz)
RIAA deviation:
S/N:
74 dB (A weighting, with 5 mV input)
Rated output:
150 mV
Distortion factor:
0.03 % (1 kHz, 3 V)
6 ~ 16 Ω/ohms
6 ~ 16 Ω/ohms
A + B
8 ~ 16 Ω/ohms
n
Video section
• Standard video connectors
Input / output level and impedance:
1 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to "OFF")
• S-Video connectors
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
C (color) signal — 0.286 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to "OFF")
Frequency response:
• Color component video connector
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
P
/ C
B
P
/ C
R
Frequency response:
5 Hz ~ 100 MHz — +0, –3 dB (when video convert set to "OFF")
n
Tuner section
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
Receiving Range:
87 .5 MHz ~ 107 .9 MHz
1.0 µV (11.2 dBf)
Usable Sensitivity:
50 dB Quieting Sensitivity:
MONO
STEREO 23 µV (38.5 dBf)
S/N (IHF-A):
MONO
STEREO 72 dB
Total harmonic Distortion (at 1 kHz):
MONO
STEREO 0.3 %
n
General
Power supply:
AC 120 V, 60 Hz
7 .2 A
Power consumption:
0.3 W (Standby)
Maximum external dimensions:
434 (W) x 171 (H) x 420 (D) mm (17-3/32" x 6-47/64" x 16-17/32")
Weight:
17 .8 kg (39 lbs 3.9 oz)
n
Main remote control unit (RC-1068)
Batteries:
LR6/AA Type (two batteries)
Maximum external dimensions:
63 (W) x 238 (H) x 31 (D) mm (2-31/64" x 9-3/8" x 1-7/32")
Weight:
190 g (Approx 6.7 oz) (including batteries)
n
Sub remote control unit (RC-1070)
Batteries:
R03/AAA Type (two batteries)
Maximum external dimensions:
49 (W) x 220 (H) x 24.5 (D) mm (1-59/64" x 8-21/32" x 31/32")
114 g (Approx 4 oz) (including batteries)
Weight:
b For purposes of improvement, specifications and design are subject to change without notice.
signal — 0.7 Vp-p, 75 Ω/ohms
B
signal — 0.7 Vp-p, 75 Ω/ohms
R
[FM]
[AM]
W)
-15
520 kHz ~ 1710 kHz
18 µV
1.6 µV (15.3 dBf)
77 dB
0.15 %
Advertisement
Table of Contents
