Troubleshooting
Print is too light
These are possible solutions. Try one or more of the following:
C
,
HECK THE DARKNESS
The Toner Darkness setting is too light, the Brightness setting is too light, or the Contrast setting is too low.
•
Change these settings from the printer control panel Quality menu.
•
For Windows users, change these settings from Print Properties.
•
For Macintosh users, change these settings from the Print dialog and pop‑up menus.
T
HE PAPER HAS ABSORBED MOISTURE DUE TO HIGH HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
C
HECK THE PAPER
Avoid textured paper with rough finishes.
C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in the tray:
1
From the printer control panel Paper menu, check the Paper Type setting.
2
Before sending the job to print, specify the correct type setting:
•
For Windows users, specify the type from Print Properties.
•
For Macintosh users, specify the type from the Print dialog.
T
HE TONER IS LOW
When 88 Cartridge Low appears, order a new toner cartridge.
T
HE TONER CARTRIDGE MAY BE DEFECTIVE
Replace the toner cartridge.
,
BRIGHTNESS
AND CONTRAST SETTINGS
282