Lexmark 19Z0200 - X 860de 4 B/W Laser User Manual page 261

User's guide
Hide thumbs Also See for 19Z0200 - X 860de 4 B/W Laser:
Table of Contents

Advertisement

Troubleshooting
7
Open the scanner cover, and remove any jammed pages.
8
Close the scanner cover.
9
Touch Continue.
293 paper jam
The printer was sent a scan job, but found no original document in the ADF. Try one or more of the following:
Touch Continue if no scan job is active when the message appears. This clears the message.
Touch Cancel Job if a scan job is processing when the message appears. This cancels the job and clears the message.
Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the ADF
immediately after the last successfully scanned page.
Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the scanner glass immediately after
the last successfully scanned page.
Touch Finish job without further scanning if page jam recovery is active. The job ends at the last successfully scanned
page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail, or FTP.
Touch Restart job if job recovery is active and the job is restartable. The message clears. A new scan job containing
the same parameters as the previous job starts.
261

Advertisement

Table of Contents
loading

This manual is also suitable for:

X860X862X864X860deX864deX862de

Table of Contents