Table of Contents
Advertisement
Understanding printer menus
Menu item
Sides (Duplex)
On
Off
Staple
On
Off
Duplex Binding
Long Edge
Short Edge
Orientation
Auto
Portrait
Landscape
N‑up (pages/side)
Off
2 Up
3 Up
4 Up
6 Up
9 Up
12 Up
16 Up
N‑up Border
None
Solid
N‑up Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Separator Sheets
None
Between Copies
Between Jobs
Between Pages
Description
Enables duplex printing (two-sided printing)
Enables stapling
Note: Off is the factory default setting.
Defines the way duplexed pages are bound and how the printing on the back of the
page is oriented in relation to the printing on the front of the page
Notes:
•
Long Edge is the factory default setting.
•
Long Edge specifies that binding be placed on the left edge of portrait pages
and the top edge of landscape pages.
•
Short Edge specifies that binding be placed on the top edge of portrait pages
and the left edge of landscape pages.
Specifies the orientation of the print job
Note: Auto is the factory default setting.
Specifies that multiple‑page images be printed on one side of a sheet of paper.
This is also referred to as Paper Saver.
Notes:
•
Off is the factory default setting.
•
The number selected is the number of page images that will print per side.
Prints a border around each page image when using N‑up
Note: None is the factory default setting.
Specifies the positioning of multiple‑page images when using N‑up
Notes:
•
Horizontal is the factory default setting.
•
Positioning depends on the number of images and whether the images are in
portrait or landscape orientation.
Places a sheet of paper between pages, copies, or jobs based on the value selected
Note: None is the factory default setting.
185
Advertisement
Table of Contents
