Understanding printer menus
Menu item
Annotations
Do Not Print
Print
PostScript menu
Menu item
Print PS Error
On
Off
Font Priority
Resident
Flash/Disk
PCL Emul menu
Menu item
Font Source
Resident
Disk
Download
Flash
All
Font Name
<list of available fonts>
Description
Prints annotations in a PDF
Note: Do Not Print is the factory default setting.
Description
Prints a page containing the PostScript error
Note: Off is the factory default setting.
Establishes the font search order
Notes:
•
Resident is the factory default setting.
•
A formatted flash memory option card or printer hard disk must be
installed in the printer and operating properly for this menu item to be
available.
•
The flash memory option or printer hard disk cannot be Read/Write,
Write, or password protected.
•
Job Buffer Size must not be set to 100%.
Description
Specifies the set of fonts used by the Font Name menu item
Notes:
•
Resident is the factory default setting. It shows the factory default set of
fonts downloaded into printer RAM.
•
Flash and Disk settings appear only if applicable and show all fonts
resident in that option.
•
Flash and Disk options must be properly formatted and cannot be
Read/Write, Write, or password protected.
•
Download appears only if applicable and shows all the fonts downloaded
into printer RAM.
•
All shows all fonts available to any option.
Identifies a specific font and the option where it is stored
Notes:
•
Courier 10 is the factory default setting.
•
The font source abbreviation is R for Resident, F for Flash, K for Disk, and
D for download.
193