Connecting To The Ieee 1284 Interface - Ricoh Aficio MP 3500SP General Settings Manual

Connecting to the IEEE 1284 Interface

This section describes how to connect the IEEE 1284 interface cable to the IEEE
1284 interface board.
A
Make sure the main power switch on the machine is off.
B
Turn off the main power switch of the host computer.
C
Connect the IEEE 1284 interface cable to the IEEE 1284 port.
D
Connect the other end of the cable into the interface connector on the host
computer.
Check the shape of the connector to the computer. Connect the cable firmly.
E
Turn on the main power switch of the machine.
F
Turn on the host computer.
When using Windows 95/98/Me/2000/XP and Windows Server 2003, a
printer driver installation screen might appear when the computer is turned
on. If this happens, click [Cancel] on the screen.
Note
❒ For details about installing the printer driver, see "Preparing the Machine",
Printer Reference.
Reference
"Turning On the Power", About This Machine
"Preparing the Machine", Printer Reference
AJL004S
Connecting to the Interfaces
1
9