Setting Each Track's Playback Level; Setting Each Track's Pan; Adjusting The Recorder's Playback Master Level - DigiTech GNX4 Owner's Manual

Setting Each Track's Playback Level:

1. Press the REWIND button once to return the song to the beginning.
2. Enable any track(s) you want to playback by pressing their TRACK buttons until they are lit green.
3. Press the PLAY button. Playback of the tracks begins.
4.To adjust the playback level of the tracks, press the LEVEL button once.
5. Press any track button that is playing back. The selected TRACK button will light green and the
other TRACK button LEDs turn off. The main display reads
6.Turn the DATA WHEEL to adjust this track's playback level. The range is from
7. Select other tracks and adjust their playback level by repeating steps 5 and 6.
8. Press the LEVEL button to exit.

Setting Each Track's Pan:

1. Press the PAN button once. It will light green and the main display will read
(X=track number).
2.Turn the DATA WHEEL to the left to pan the track to the left in the stereo field (
Turn the DATA WHEEL to the right to pan the track to the right (
3. Select other tracks and adjust their pan position by pressing the track button and repeating step 2.
4. Press the PAN button again to exit.

Adjusting the Recorder's Playback Master Level

As more tracks are recorded, the output level will begin to increase. You will notice the Playback
Meter will reach clipping much easier which will cause distortion in the audio being played back. To
compensate for this, the GNX4 recorder has a Master Level to control the overall playback level of the
internal recorder. To adjust the Master playback level, follow these steps:
1. Press the PLAY button to start playback of the song.
2. Press the MASTER button and use the DATA WHEEL to reduce or increase the playback level so
that the PLAYBACK meter level is consistently lighting the -6dB LED on the meter and only lighting
the 0dB LED occasionally.
NOTE: As more tracks are recorded, further adjustments to the Master Level may need to be made
to prevent clipping.
The GNX4's 8-Track Recorder
(X = track number).
to .
).
).
79