Using Bias ® Deck ™ Se; Configuring The Audio Settings For Bias Deck Se - DigiTech GNX4 Owner's Manual

Computer Recording via USB
Using BIAS
You must read the Software Installation Guide that came packaged with the GNX4 before
connecting it to your Mac

Configuring the Audio Settings for BIAS Deck SE

Once you have installed BIAS Deck SE and launched the program, you will have to configure the Audio
Settings to recognize the GNX4 as the hardware you want to use. To configure BIAS Deck SE's Audio
Settings for use with the GNX4 follow the steps outlined below:
1. With the GNX4 connected to your Mac, start the BIAS Deck SE application.
2. Go to Options and select Hardware Configuration.
3. Select Core Audio for the audio card and click OK.
4. Next go to Options and select Hardware Options.
5. Select DigiTech Mac USB for both the input and output and click OK.
You are now ready to begin recording with BIAS Deck SE.
100
® Deck ™ SE
® 's USB port and using BIAS Deck SE.