Table of Contents
Advertisement
Effects and Parameters
Type - Knob 1 is used to select one of the 5 Talker types. Talker types range from
tonal characteristics), to
Sensitivity - Knob 2 adjusts the sensitivity of the microphone level (
from your microphone must be loud enough for the Talker to work properly. If the microphone input
is too weak, the Talker will have trouble tracking. If the input is too strong, the Talker will clip making
the words unintelligible. Adjust the mic level on the GNX4's rear panel so that the LEDs light, but
stay below the the clip level. (See Optimizing the Mic Input Level on page 13 for more
information regarding mic level adjustment.) The mic level sensitivity ranges are from
sensitive) to
Knob 3, Knob 4, and Knob 5 have no function when Talker is selected.
Stomp Box Modeling
The GNX4 Stomp Box Modeling emulates the tones of the most popular distortion boxes ever used
including the DOD OD250, Boss DS-1, Arbiter Fuzz Face, Electro Harmonix Big Muff, ProCo RAT, DOD
Grunge, Boss Metal Zone, Ibanez TS-9,Voodoo Labs Sparkle Drive, and the Guyatone OD-2*.
*Arbiter, Boss, Electro-Harmonix, ProCo, Ibanez,Voodoo Labs, Guyatone, DS-1, Fuzz Face, Big Muff, RAT, Metal Zone,TS-9, Sparkle Drive, and
OD-2 are trademarks of their respective companies and are in no way associated with DigiTech
Stomp Box On/Off - The Status button turns the Stomp Box Modeling on and off.
Type - Knob 1 selects the type of Stomp Box to be used. Choices include:
Based on an Ibanez TS-9
Based on a ProCo Rat Distortion
Based on a Boss DS-1
Based on a DOD Overdrive 250
Based on the Electro Harmonix
Big Muff Pi
Type
Gain - Knob 2 controls the amount of Gain or distortion in the Stomp Box model. Range is from
.
Parameter 1 - Knob 3 acts as a Tone control for each Stomp Box and controls the Mid Frequency of
Parameter 2 - Knob 4 acts as a second Tone control for the SparkleDrive, and Grunge Stomp Box
*Parameter 3 - Controls the Low Frequency of the Zone model. Range is from
*Parameter 4 - Controls the High Level of the Zone model. Range is from
Level - Knob 5 controls the output level of the Stompbox model. Range is from
*These Parameters are only available using the X-E
38
(most sensitive).
Gain
Param1
the Zone model. Range is from
models and controls the Mid Level of the Zone model. Range is from
5 (bright tonal characteristics).
Param2
Param3*
0
to
.
™
Editor/Librarian software.
DIT
). The input level
0
Based on a GuyaTone OD-2
Based on a Voodoo Labs SparkleDrive
Based on a DigiTech
®
Grunge
Based on an Arbiter Fuzz Face
Based on a Boss Metal Zone
Param4*
Level
0
to
0
to
.
0
to
.
0
to
.
1 (deep
(least
®
0
to
.
Advertisement
Table of Contents
