Expression Pedal Assignment
Expression Parameter Assignment List
The following parameters can be assigned to any of the 3 Expression Pedal, Control A, B, C footswitches,
or LFO 1 and LFO 2.
(No Link)
(Amp Channel)
(Amp Warp)
(Cabinet Warp)
(Warp)
(Green Gain)
(Green Level)
(Red Gain)
(Red Level)
(Wah On/Off)
(Wah Pedal)
(Pickup Simulator On/Off)
(Pickup Type)
(Compressor On/Off)
(Compressor Attack)
(Compressor Ratio)
(Compressor Threshold)
(Compressor Gain)
(Whammy
Whammy
Active Effect
(Whammy)
(IPS)
(Detune)
(Pitch)
(Talker 1)
(Talker 2)
(Talker 3)
(Talker 4)
(Talker 5)
(Stompbox On/Off)
Stompbox Effect Parameters
Active Stompbox
(Screamer)
(Rodent)
(DS Dist)
(DOD 250)
(Big MP)
(Guy OD)
(Sparkdrv)
(Grunge)
(Fuzzy)
(Zone)
48
™
/IPS/Talker
™
On/Off)
™
/IPS/Talker
™
Effect Parameters
No Parameter is assigned
Switches Amp Channels
Warps the Channel 1 and Channel 2 Amp Models
Warps the Channel 1 and Channel 2 Cabinet types
Warps Channel 1 and Channel 2
Controls the Amp Gain for Channel 1
Controls the Volume of Channel 1
Controls the Amp Gain for Channel 2
Controls the Volume of Channel 2
Turns the Wah on and off
Adjusts the Wah sweep
Turns the Pickup Simulator on and off
Selects the Pickup type
Turns the Compressor effect on and off
Controls the Compressor's Attack time
Controls the Compressor's Ratio
Controls the Compressor's Threshold
Controls the Compressor's Gain
Turns the Whammy/IPS/Talker module on and off
Turns the Stompbox module on and off