Preset Bounceback; Hands-Free Default; Bank Names - DigiTech GNX4 Owner's Manual

Preset Bounceback

If you would rather not bypass individual presets in Preset Mode by pressing their footswitches
repeatedly, you can enable the Preset Bounceback function in the Utility menu. For example, let's say you
select Preset 1 using FOOTSWITCH 1 as your rhythm tone. Then you select Preset 4 using
FOOTSWITCH 4 as your solo tone. You can now press FOOTSWITCH 4 again and Preset 1 will be
selected again. Pressing FOOTSWITCH 4 repeatedly will bounceback between Preset 4 and Preset 1.
To enable the Preset Bounceback feature, do the following:
1. Press the UTILITY control panel button and use the PREV/NEXT arrow buttons to locate the
Bounceback feature. The display will read
2. Rotate the DATA WHEEL to turn the BounceBack feature on.
3.When finished, press EXIT.
NOTE:The Preset Bounceback feature only works when the GNX4 is in Preset Mode.
For more information regarding the footswitch functions for Preset Mode see page 59.

Hands-Free Default

The GNX4 has the ability to have hands free recording using either the onboard recorder or when
connected to the computer while Pro Tracks Plus is running. The GNX4 cannot however have hands free
control both the internal computer and the computer simultaneously.
When only a card is present in the memory card slot and no USB is connected, the hands free functions
are dedicated to the onboard recorder. When only USB is connected and no card present, hands free
functions are dedicated to the computer. But if you have both a card present in the memory card slot
and USB connected, you must select which method of recording is going to have the hands free function.
This is set using the Hands Free utility menu. To set this option, follow these steps:
1. Press the UTILITY button.The button will light indicating you are in the Utility menu.
2. Press the NEXT button several times to select
3. Use the DATA WHEEL to select the default hands free function to the GNX4's recorder (
) or to the computer (
4.When finished, press EXIT.

Bank Names

The GNX4 lets you customize the names of the 16 User Banks where the 80 User Presets reside as well
as the 16 Card Banks where the 80 Card Presets reside when a Compact Flash card is installed.
Customized Bank names aids in quickly identifying the User Bank containing the presets you may need for
a particular song or set.The procedure for naming the User Banks is as follows:
1. Press the UTILITY button.The button will light indicating you are in the Utility menu.
2. Use the PREV or NEXT buttons to select
3. Use the DATA WHEEL to select the User Bank or Card Bank you want to rename. The Preset Bank
LEDs to the left of the DATA WHEEL indicate whether a User Bank or a Card Bank is selected.
4. Press STORE to access the naming menu.The far left character of the Bank name begins to blink.
5. Use the DATA WHEEL to select the desired alpha-numeric character.
6. Press the NEXT button to select the next character to the right, and the PREV button to select the
previous character to the left.
7. Repeat steps 5 and 6 until the Bank name appears in the display.
8. Once the Bank name appears correctly in the display, press STORE again.
briefly indicating the Bank name has been saved, and then new Bank name appears.
9.When finished, press EXIT.
.
(Hands Free Default).
).
(Bank Names).
Utilities
is displayed
105