Amp Footswitch; Expression Parameter Assignment List - DigiTech GNX1 User Manual

Amp Footswitch

From the factory, the Amp Footswitch changes between the Green and the Red Amp Channels. However, the GNX1
allows you to select the function of the Amp Footswitch.The procedure for assigning the function of the Amp
Footswitch is as follows:
1. Press the Effect Select button until the Exp Assign row has been selected.
2. Press the Status button until the Display reads AMP FS (Amp Footswitch).
3. Rotate the Number 1 Knob to select the desired function of the Amp Footswitch.Your choices include:
G-R - Switches between the Green and Red Amp Channels.
G-Y - Switches between the Green and Yellow (Warped) Channels.
R-Y - Switches between the Red and Yellow (Warped) Channels.
G-R-Y - Switches between the Green, Red, and Yellow (Warped) Channels.
4. Store your Amp Footswitch assignment to your Preset. See page 17 for more information on the storing procedure.

Expression Parameter Assignment List

The following Parameters can be assigned to the any of the 3 Expression Pedal links, LFO 1, or LFO 2.
NOLINK (No Link) - No Parameter is assigned
VOLPRE (Volume Pre) - Controls the Volume after the Amp Modeling but before the Effects.
VOLPST (Volume Post) - Controls the Volume at the end of the Effects chain.
A WARP (Amp Warp) - Warps the Green and Red Amp Models.
C WARP (Cabinet Warp) - Warps the Green and Red Cabinet types.
WARP (Warp) - Warps the Green and Red Channels.
CMPATK (Compressor Attack) - Controls the Compressor's Attack time.
CMPRTO (Compressor Ratio) - Controls the Compressor's Ratio.
CMPTHR (Compressor Threshold) - Controls the Compressor's Threshold.
CMPGAN (Compressor Gain) - Controls the Compressor's Gain.
AMOUNT/SHIFT (Parameter 1) - Controls the interval for the IPS module.
WHMPDL (Whammy™ Parameter 2) - Controls the pitch bend when Whammy™ is engaged.
SCALE (IPS Parameter 2) - Controls the scale when the IPS module is engaged.
KEY (IPS Parameter 3) - Controls the key type when the IPS module is engaged.
IPSMIX/IPSLVL (IPS Mix/Level) - Controls the wet/dry mix or Level for the IPS module.
AMPCHN (Amp Channel) - Switches Amp Channels.
G GAIN (Green Gain) - Controls the Amp Gain for the Green Channel.
G LEVL (Green Level) - Controls the Volume of the Green Channel.
R GAIN (Red Gain) - Controls the Amp Gain for the Red Channel.
R LEVL (Red Level) - Controls the Volume of the Red Channel.
GATTHR (Gate Threshold) - Controls the Noise Gate's Threshold.
GATATK (Gate Attack) - Controls the Noise Gate's Attack time.
PLKSNS (Gate Pluck) - Controls the Noise Gate's Pluck Sensitivity.
Modulation Effects Parameters
Active Effect
SPEED
Chorus
SPEED
Flanger
SPEED
Phaser
SPEED
Triggered Flanger
SPEED
Triggered Phaser
SPEED
Tremolo
SPEED
Panner
SPEED
Vibrato
SPEED
Rotary Speaker
SPEED
Auto Ya™
YA PDL
YaYa™
ATTACK
SynthTalk
DEPTH PREDLY
DEPTH REGEN
DEPTH REGEN
SENSTV LFO ST
SENSTV LFO ST
DEPTH
DEPTH
DEPTH
DEPTH DOPPLR
DEPTH RANGE
DEPTH RANGE
RELEAS VOX
S F - O
ECTION IVE
MODBAL MODLVL
MODBAL MODMIX
MODBAL MODMIX
MODMIX
MODMIX
XOVER MODBAL
MODBAL MODMIX
MODBAL MODMIX
MODBAL SENSTV
F
THER UNCTIONS
MODMIX
33