Manual Voice Vlan Assignment Mode Configuration Example - H3C LS-3100-52P-OVS-H3 Operation Manual

Maximum of Voice VLANs: 16
Current Voice VLANs: 2
Voice VLAN security mode: Security
Voice VLAN aging time: 1440 minutes
Voice VLAN enabled port and its mode:
PORT
-----------------------------------------------
GigabitEthernet1/0/1
GigabitEthernet1/0/2

Manual Voice VLAN Assignment Mode Configuration Example

Network requirements
Create VLAN 2 and configure it as a voice VLAN permitting only voice traffic to pass through.
The IP phones send untagged voice traffic. Configure GigabitEthernet 1/0/1 as a hybrid port.
Configure GigabitEthernet 1/0/1 to operate in manual voice VLAN assignment mode. Configure
GigabitEthernet 1/0/1 to allow voice traffic with an OUI address of 0011-2200-0000, a mask of
ffff-ff00-0000, and a description string test to be forwarded through the voice VLAN.
Figure 3-2 Network diagram for manual voice VLAN assignment mode configuration
Configuration procedure
# Configure the voice VLAN to operate in security mode. (Optional. A voice VLAN operates in security
mode by default.)
<DeviceA> system-view
[DeviceA] voice vlan security enable
# Add a recognizable OUI address 0011-2200-0000.
[DeviceA] voice vlan mac-address 0011-2200-0000 mask ffff-ff00-0000 description test
# Create VLAN 2 and configure it as the voice VLAN.
[DeviceA] vlan 2
[DeviceA-vlan2] quit
[DeviceA] voice vlan 2 enable
# Configure GigabitEthernet 1/0/1 to operate in manual voice VLAN assignment mode.
[DeviceA] interface gigabitethernet 1/0/1
[DeviceA-GigabitEthernet1/0/1] undo voice vlan mode auto
# Configure GigabitEthernet 1/0/1 as a hybrid port.
VLAN MODE
2 AUTO
3 AUTO
3-8